3d printing service Malaysia
  • 3D PRINTING Service
  • 3D Printing Filament
  • Printing gallery
    • Blog&News
  • ☆ Contact Us ☆

Test your 3D printer's limits with this hard-to-print test object

16/4/2015

0 Comments

 
图片
Theoretically, 3D printing technology can be used to make just about anything. Even a basic desktop FDM 3D printer should be capable of creating diverse, complex and unnatural shapes, just about anything you can imagine. The reality is that most users only 3D print basic geometric shapes. So really how do we know what our 3D printers are capable of? Can they truly do what it says on the tin?
图片
While we really should tackle a complex and educational project every now and then, there’s an easier option: a hard-to-print test file. While a few can be found on the web, this one by Thingiverse user ctrlV is quite good. It features just about any shape and size you can think of in a single object, and should have enough challenging parts for your 3D printer. The following tests are included:

  •  Size: the object is 4x50x50mm (baseplate)
  •  Hole size: 3 holes (3/4/5mm)
  •  Nut size: M4 Nut should fit perfectly
  •  Fine details: pyramide, cone, all numbers
  •  Rounded print: wave, half sphere
  •  Minimum distance between walls: 0.1/0.2/0.3/0.4/0.5mm
  •  Overhang: 25/30/35/40/45
  •  Flatness: all flat areas
图片
It's a great way of finding out what 3D printing and slicing areas are problematic and which are easy, which will hopefully increase your future success rate. Just download the files from Thingiverse here, and you’re good to go. The entire test can be 3D printed at an infill of 33% (or something in that area), with an optimal layering height of 0.1 mm or less. Depending on your printer, it will only take an hour or so to complete. Let’s you see what you can do. 
0 Comments



Leave a Reply.

    Author

    Bruce Mui is a 3D Printer hobbies, experien in DIY set 3D printer build up and trouble shooting .

    Archives

    April 2018
    April 2017
    February 2016
    January 2016
    December 2015
    September 2015
    August 2015
    July 2015
    June 2015
    May 2015
    April 2015
    March 2015
    December 2014

    RSS Feed

    Categories

    All

Want MAKE 3D PRINT? (1M3DP)
We provided 3D printing service and 3D Printer calibration/repair/assembly Service in Malaysia(Kuala Lumpur)  
​Contact us for more detail.
  • 3D PRINTING Service
  • 3D Printing Filament
  • Printing gallery
    • Blog&News
  • ☆ Contact Us ☆
✕